Preparing Chargers For Desktop Charging - Motorola Solutions PMPN4003 Guia Del Usuario

MN010173A01-AA
Chapter 2: Charger Operations
2.6

Preparing Chargers for Desktop Charging

Procedure:
Prepare charger for desktop charging by performing one of the following actions:
Option
Charging with mounting bracket
16
Action
NOTE:
● If the charger is placed in a vertical position, it
is recommended to place the charger on the
mounting bracket to prevent it from toppling.
● It is recommended to use 10–16x1.5 inch. tap-
ping screw to mount the bracket onto table top.
● Ensure that the screws do not penetrate
through the table.
a. Screw the wall bracket to the table.
b. Place the power supply inside the wall bracket.