Oase BioStyle Serie Instrucciones De Uso página 12

Remove / install heater
You can remove or install the heater to
• Retrofit your filter with a heater,
• Thoroughly clean the filter housing,
• Replace a defective heater.
Prerequisite:
• The pump is removed.
Troubleshooting
Malfunction
Pump does not start up
Insufficient water flow
Filtration insufficient
Water heating insufficient
(only "Thermo" version)
12
Possible cause
Insufficient power
Impeller unit blocked
Filter housing or impeller dirty
Impeller unit worn out
Filter media dirty
Telescopic intake blocked
Telescopic intake and partition wall
not assembled correctly
Filter media soiled or worn
Filter housing clogged
Insufficient power for heater miss-
ing
Heater defective
Remedy
Check the power supply
cord
Cleaning
Cleaning
Replace impeller unit
Replace filter media
Clean telescopic intake
Assemble telescopic intake
and partition wall correctly
Replace filter media
Clean filter housing
Check the power supply
cord
Replace
BSE0008