Publicidad
Idiomas disponibles
Idiomas disponibles
Commissioning/start-up
NOTE
BioStyle 30 Thermo, 50 Thermo:
Fire hazard due to highly flammable material on hot surface.
Only switch on the heater when it is completely submerged in water.
If there is air in the telescopic intake, it may take up to 3 minutes for the pump to
deliver water.
• Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
– Lay the power supply cord so that a drip loop is formed and the lowest point is
below the socket. This prevents dripping water from entering the socket.
– Set the desired flow rate.
• Switching off: Pull the power plug from the outlet.
Form drip loop
8
Adjust flow rate
BSE0024
BSE0013
Publicidad
