Publicidad
Idiomas disponibles
Idiomas disponibles
right way round (polarity). This is shown on
the battery compartment (see Figs. C + E).
Close the battery compartment cover.
Connecting the weather station with the
outdoor sensor and the DCF radio signal:
After the batteries have been inserted, the
weather station attempts to establish a connection
with the outdoor sensor. This process can take a
few minutes. The
vice has successfully connected to the external
sensor, the
symbol stops flashing and the tem-
perature is shown in the LC display.
Note: If the weather station does not receive the
signal from the outdoor sensor within 3 minutes,
the weather station automatically starts with the
reception of the radio time signal.
After successful reception of the outdoor sensor
signal or after 3 minutes, the weather station starts
with the reception of the radio time signal. This
process can take up to 5 minutes and is indicated
in the LC display by the flashing
After successful reception of the DCF radio signal,
the
symbol is displayed continuously in the
LC display.
Note: Do not move the weather station while it is
receiving the signal. Otherwise this could interfere
with reception.
If synchronisation is not possible when the
weather station is being first set up, try changing
symbol flashes. Once the de-
symbol
.
11
GB/MT
75
Publicidad
