Operating Phases Of The Appliance; Comfort Climate - Ravelli RBH 150 V Manual De Uso

Operating phases of the appliance

Modulation
During the work phases, the appliance is aimed at reaching the room/water temperature set by the user;
when one of these conditions is met, the stove switches to MODULE WORK phase, in which fuel consumption is minimised.
Should it be necessary to measure the room temperature using an external thermostat (optional), the latter must be
connected to the dedicated connector to the rear of the stove; therefore, the user will be able to enable temperature reading
in the dedicated menu "SETTINGS - ENABLE THERMOSTAT". On display appears the writing TON / TOFF based on
thermostat request.
CONNECT AN EXTERNAL THERMOSTAT WITH A SIMPLE DRY CONTACT, THEREFORE, NOT POWERED.
MOREOVER, WE RECOMMEND YOU USE A THERMOSTAT WITH A MINIMUM OFFSET OF 3°C
IF YOU INTEND TO USE THE COMFORT CLIMA FUNCTION.

Comfort climate

The activation of this function enables the stove to reduce pellet consumption by activating the modulation phases, after the desired
temperature has been reached. Subsequently, the stove checks that the temperature is maintained steady for a preset time. If this
condition is met, it automatically switches off, and on display appears the writing ECO. The stove turns on again when the temperature
drops below the set threshold.
Below are given the steps for accessing the relative menu.
MENU
USER
MANUFACTURER'S
TECHNICIAN
Press the key
"access menu" to
access the
MENU page
Once you have accessed the Climate Comfort menu, it is possible to operate on the 4 types of settings dedicated to the function:
COMFORT CLIMA
ENABLE COMFORT
COMFORT CONTROL
RESTART DELTA
SHUTDOWN DELAY
COMFORT CLIMA
ENABLE COMFORT
COMFORT CONTROL
RESTART DELTA
SHUTDOWN DELAY
COMFORT CLIMA
ENABLE COMFORT
COMFORT CONTROL
RESTART DELTA
SHUTDOWN DELAY
COMFORT CLIMA
ENABLE COMFORT
COMFORT CONTROL
RESTART DELTA
SHUTDOWN DELAY
Press the key for several times until the Stand-by page is displayed.
Use and maintenance manual RBH 150 V- RBH 200 V
Press the key
"confirm"
to access the
USER page
ENABLE COMFORT
COMFORT CLIMA DELTA
SHUTDOWN DELAY
USER
POWER SETTING
CHRONOTHERMOSTA
SCREW LOADING
SET AIR-PELLET
Press the key "selection" for
page of the USER menu
AIR
WATER
Rev.1 14/02/18
Page 77
USER
STOVE STATE
COMFORT CLIMA
SETTINGS
several times
to go to the second
and select
CLIMATE COMFORT.
ENABLE COMFORT
Select the control type
Comfort Clima on t°C
Water or room temperature
using the key
UP/DOWN key
"V" key to confirm the
selection
COMFORT CLIMA DELTA
SHUTDOWN DELAY
EN