Settings > Enable thermostat
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
Press the "enter" key
to access the
SETTINGS
ENABLE THERMOSTAT
Press the key
"confirm"
to enable the function.
Settings > Season
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
Press the key
"confirm" to
access the
SETUP
SETTINGS
Use the UP/DOWN keys to change the WINTER/
SUMMER season. Function that can be set when
working with DHW puffer (Boiler).
See chap. Evolved hydraulic diagrams
Settings > Contrast
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
Press the key
"confirm" to
access the
SETUP
SETTINGS
Use the UP/DOWN keys to change contrast setting and obtain
a better visualisation of the information shown on the handheld
set.
The value can vary from 0 to 100. 50 with respect to the
standard value.
Settings > Firmware version
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
Press the "enter" key to
access the
SETTINGS
By pressing the button you will confirm the data and switch to the page within the SETTINGS menu.
Use and maintenance manual RBH 150 V- RBH 200 V
ADJUST
Press the key
"selection" to switch to
ENABLE THERMOSTAT.
Press the key for several
times
to return to
"STAND BY" page
ADJUST
Press the key
"selection" to switch
to the function
CONTRAST.
ADJUST
Press the key
"selection" to switch
to the function
CONTRAST.
ADJUST
Press the key
"selection" to switch to
CONTRAST.
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
Press the key
"confirm"
to access the function
In Stand-By mode, instead of room temperature measured
and settable, appears the line T ON if the room in which
the thermostat is installed has not reached the temperature
requested or the writing T OFF if the temperature in the
room is reached.
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
Press the key
"confirm"
to access the function
By pressing the following key you will confirm of data
and switch to the page within SETTINGS menu.
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
Press the key
"confirm"
to access the function
By pressing the following key you will confirm of data
and switch to the page within SETTINGS menu.
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
Press the key
"confirm"
to access the function
Rev.1 14/02/18
Page 81
EN
ENABLE THERMOSTAT
WINTER
SUMMER
CONTRAST
FIRMWARE