Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
off. Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the
power source and/or remove
the battery pack, if detach-
able, from the power tool be-
fore making any adjustments,
changing accessories, or stor-
ing power tools. Such preventive
safety measures reduce the risk of start-
ing the power tool accidentally.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these in-
structions to operate the power
tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and ac-
cessories. Check for misalign-
ment or binding of moving
parts, breakage of parts and
any other condition that may
affect the power tool's oper-
ation. If damaged, have the
power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working con-
ditions and the work to be per-
formed. Use of the power tool for
operations different from those inten-
ded could result in a hazardous situ-
ation.
h) Keep handles and grasping
surfaces dry, clean and free
26
from oil and grease. Slippery
handles and grasping surfaces do not
allow for safe handling and control of
the tool in unexpected situations.
5. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety instructions for
routers
• Hold the power tool by the in-
sulated handle surfaces only,
as the cutter might hit its own
power cord. Contact with a live wire
can also cause a charge in metal parts
of the device and result in an electric
shock.
• Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your hand or
against the body leaves it unstable and
may lead to loss of control.
Additional safety
instructions
• Make sure that the mains voltage
matches the details on the type plate.
• If the power cord of this device is dam-
aged, it must be replaced by the manu-
facturer or their representative to avoid
safety hazards. contact the service
centre.
• Connect the device only to a power
outlet with a residual current circuit
breaker (FI switch) of rated residual
current no more than 30 mA.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or fire.
Publicidad
