Control Panel And Knobs; Cutting Board; Griddle - Monogram ZGU486NR Manual Del Propietário

Thoroughly clean the griddle of grease and food

Griddle

particles, using a square-edged metal spatula,
(on some models)
while it is still hot.
Wipe the griddle with a dry, heavy, coarse cloth
to remove any remaining residue and food
particles. If the griddle is cleaned with anything
other than a dry, heavy, coarse cloth, it will need
to be reseasoned.
Never flood the hot griddle with cold water.
This could cause the griddle to crack or warp.
Cutting Wash the bamboo cutting board with warm
water and a mild soap. Occasionally, wipe it
board
with mineral oil.
(on some models)
Do not clean the cutting board in the
dishwasher.
Control
Clean up spatters with a damp cloth.
panel and
Remove heavier soil with warm, soapy water.
knobs
Do not use abrasives of any kind on the control
panel or knobs.
The control knobs may be removed for easier
cleaning. To remove a knob, pull it straight off
the control panel. Wash the knobs in hot soapy
water, but do not soak.
An optional set of black control knobs is available
for purchase at additional cost. Order the knob
set for your model.
Models
ZGU366NPSS, ZGU366LPSS
ZGU364NRPSS, ZGU364LRPSS
ZGU364NDPSS, ZGU364LDPSS
ZGU484NGPSS, ZGU484LGPSS
ZGU486NRPSS, ZGU486LRPSS
ZGU486NDPSS, ZGU486LDPSS
To order, call GE National Parts Center
at 1.800.626.2002.
16
Care and Cleaning
Order Numbers
WB03K10269
WB03K10270
WB03K10271
WB03K10272
WB03K10273
WB03K10274
Professional Rangetops