Installation Instructions
MOUNT THE MICROWAVE
OVEN
FOR EASIER INSTALLATION AND PERSONAL
SAFETY, WE RECOMMEND
THAT TWO
PEOPLE
INSTALL THIS MICROWAVE
OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the nylon
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT:
If filler blocks are
not used, case damage may occur from
overtightening screws.
NOTE: When mounting
the microwave oven,
thread power cord
through hole in bottom of
top cabinet. Keep it tight
throughout Steps 1-3. Do
not pinch cord or lift
oven by pulling cord...
14 |Lift microwave,
tilt it
forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting
plate.
2 | Rotate front of oven
up against cabinet
bottom.
[3 [Insert a self-aligning screw through top center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after the
threads have engaged. (It will be completely
tightened later.) Be sure to keep power cord
tight. Be careful not to pinch the cord, especially
when mounting flush to bottom of cabinet.
18
Cabinet Front
J
Cabinet Bottom Shelf
Filler Block
r
a
|
:
|
Equivalent
to Depth
Vy
of Cabinet
i
Recess
ws.
Self-Aligning Screw
Microwave Oven Top
[4
Attach the microwave oven to the top cabinet.
[5 | Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
6 | Tighten center
screw completely.
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
1800 Series
1400 and 1600 Series
Install grease filters. See the Owner's Manual
packed with the microwave.