Installation
Instructions
Refrigerator
Models 22, 23, 25 & 27
I
BEFORE YOU BEGIN
Questions?
Call 800.GE.CARES
(800.432.2737)
or Visit our Website
at: ge.com
In Canada,
call 1.800.361.3400
or Visit our Website
at: www.geappliances.ca
Read these
instructions
completely
and carefully.
• iMPORTANT - Save t hese
instructions
for local
inspector's
use.
• iMPORTANT
- Observe all
governing
codes
and ordinances.
Note
to Installer
- Be sure to leave these
instructions
with
the Consumer.
Note
to Consumer
- Keep these
instructions
for future
reference.
Skill
level - Installation
of this appliance
requires
basic
mechanical
skills.
Completion
time
- Refrigerator
Installation
30 minutes
Water
Line installation
30 minutes
Proper
installation
is the responsibility
of
the installer.
Product
failure
due to improper
installation
is not covered
under
the Warranty.
if the
refrigerator
has already
been installed,
remove
the base grille (see Step
2 in Moving
the Refrigerator),
then
skip to Step 5 in
Installing
the Refrigerator.
I
PREPARATION
WATER
SUPPLY
TO THE ICEMAKER
If the refrigerator
has an icemaker,
it will
have
to be connected
to a cold water
line. AGE
water
supply
kit (containing
tubing,
shutoff
valve,
fittings
and instructions)
is available
at extra
cost from
your
dealer,
by visiting
our Website
at go.corn (in Canada
at
www.geappliances.ca)
or from
Parts and
Accessories,
800.626.2002
(in Canada
1.888.261.3055).
TOOLS YOU WILL NEED
3/8" and 5/16" Socket
1/2" and 7/16" Wrench
Plastic Putty Knife
Phillips
Head Screwdriver
16