Descargar Imprimir esta página

Greencut GRIC300XM Manual De Instrucciones página 65

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The generator is running,
but the connected devices
are not receiving power.
The generator is working
and the AC outputs are
OK, but the DC output is
not working.
NOTE: If you are unable to resolve the problem, please contact the Official Technical Service.
TRANSPORTATION AND STORAGE
Wait 5 minutes after the machine is turned off to cool down before storing or transporting the machine.
If transporting the machine in a vehicle, secure it securely to prevent it from slipping or tipping over.
Always transport the machine in a horizontal position.
Do not store the machine near flammable materials (dry grass, wood...), gas or fuel.
Store this tool in a place not accessible to children and safe so that it does not endanger anyone and that it is dry,
clean and at a temperature between 0ºC and 45ºC.
Before storing the machine, follow the points in the maintenance chapter.
The out-of-use machine must be stored clean, on a flat surface.
If the machine is to be stored in a closed place or for a long time, empty the fuel as the vapours could come into
contact with a hot flame or body and ignite. To empty the fuel use a gasoline suction pump or start the engine
until the fuel runs out.
Wipe up spilled fuel immediately with a clean, dry, soft cloth, as fuel can damage painted surfaces or plastic parts.
Remove the spark plug and pour approx. 20 ml of engine oil into the cylinder. Pull the starter handle slowly
several times to cover the internal parts. Screw the spark plug back in.
RECICLYING AND DISPOSING
Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources.
Dispose of the device in an environmentally friendly manner. Do not dispose of it with household waste. Its plastic and
metal components can be separated and recycled. Take this appliance to an approved recycling centre (green point).
Gasoline, used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in
regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local
regulations: take them to a recycling center.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.
Generator overloaded
DC output overload protection
switch is activated
Check if the overload indicator is lit (red). Stop the
generator and disconnect all devices. Turn on the
generator and check that the overload indicator is
not lit and that the power indicator is lit green.
Reset the DC over current protection switch.
65
EN

Publicidad

loading