Publicidad
Idiomas disponibles
Idiomas disponibles
EN
The pressure setting is preset at the factory to achieve optimum pressure and cleaning. If you need to lower the pressure it can
be accomplished by these methods:
1. Back away from the surface to be cleaned. The further away you are, the less the pressure will be on the surface to be
cleaned.
WARNING!
Do not attempt to increase pump pressure. A higher pressure setting than the factory set may damage pump.
2. Reduce the speed the gasoline engine (RPM). Slow the engine down and the water pressure will go down with it.
3. Change to the 40º white nozzle. This nozzle offers a less powerful stream of water and a wider spray pattern.
4. Adjust the pressure regulator on the pump. Turn the pressure regulator knob counterclockwise to lower pressure. Once you
have finished using your pressure washer, return the pressure regulator to its original position by turning it clockwise.
WARNING!
Do not try to turn pressure regulator knob past the built-in stop damage to pump.
How to use spray wand
Your pressure washer is equipped with five spray nozzles. Each nozzle is color coded and delivers a specific spray pattern for a
particular cleaning purpose. The size of the nozzle determines the size of the fan spray and the presure out of the nozzle. The
0-15-36 and 40º nozzles offers high pressure, the chemical nozzle is low pressure nozzle.
The nozzles are housed in receptacles on the panel of the pressure washer handle. Colors on the panel identify nozzle location
and spray pattern.
WARNING!
Do not direct the discharge jet at people or animals. Do not unprotect skin and eyes as serious injury may occur.
Changing nozzles
WARNING!
DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles.
1. Pull quick connect coupler back and insert nozzle.
2. Release quick connect coupler and twist nozzle to make sure it is secure in coupler.
WARNING!
Risk of injury. Ensure nozzle is completely inserted in QC
socket and QCsnap ring is fully engaged (forward) before
squeezing gun trigger.
9
Publicidad
