Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6. storage
Engine
Consult the engine owner's manual for the manufacturers recommendations.
Pump
1. Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle.
2. Drain all water from spray gun and spray wand by holding spray gun in a vertical position with nozzle end pointing down and
squeezing trigger. Store in gun/hose holder.
3. Store chemical hose, high pressure hose, spray wand so they are protected from damage, such as being run over.
It is recommended that you follow these steps to protect the internal seals of the pressure washer when STORING THE UNIT
FOR MORE THAN 30 DAYS AND/OR WHEN FREEZING TEMPERATURES ARE EXPECTED.
4. Obtain a funnel, antifreeze and garden hose with a male hose connector attached to one end.
5. Disconnect spark plug wire.
6. Connect the hose to water inlet of pump.
7. Add antifreeze to hose.
8. Pull engine starter rope slowly several times until antifreeze comes out of high pressure hose connection of pump.
9. Remove short hose from water inlet of pump.
10. Reconnect spark plug wire.
7. Technical specifications
Engine
Working pressure
Flow
Temperature range
Other features
OMEGA 420cc - 15hp
250 bar
18 l/m / 1080 l/h
0-60ºC
10m hose, suction kit and 5 quick nozzles
15
Publicidad
