MR TAPCON 230 Manual página 25

NOTICE! Damage to the housing due to open door. Close the door of the
housing to prevent damage during wall mounting.
Fix the housing to the wall using 4 screws (M8).
Figure 18: Wall mounting
The device is mounted and can be wired up.
Proceed with wiring as shown in the connection diagram and as described in
the "Connecting device" section.
5.3.2.3 Installing the device in the housing
Open the housing swing frame.
1. Push the device into the housing swing frame from the front.
Figure 19: Pushing the device into the swing frame
7820658/06 EN Mounting
25