Publicidad
Idiomas disponibles
Idiomas disponibles
English
2- Press
or
. prog appears .
1
3- With
or
, select P1 .
P1 will flash . Press
for 5 seconds to make changes .
1
4-The P1 start time (which by default is 06:00) will flash . Using
you can change this time, by increments of 3 minutes .
Save by pressing
.
5- The P1 end time (which by default is 22:00) will flash . Using
, you can change the time, in 30-minute increments .
2
1
5 sec.
1
2
1
2
Save by pressing
6- Press
to exit the programming Mode and return to Auto Mode .
Note: without action on the keys, it will return to Auto after a few minutes .
• Choise and allocation programmes
1- If you just set the time and day, the cursor moves automatically under
From Auto, Comfort, Eco or Frost protection mode, than press
for 5 seconds . When the cursor positionned under the set time symbol
, press
Prior information: display area
Correspondence days / numbers
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
The days of the week will scroll on display with the programmes that you
set for them, meaning
or
,
2- Press
or
thursady ecc .) will flash .
or
3- Choose the programme you want for this day with
pressing
.
4- The programme assigned to the second day of the week (Tuesday)
will flah . Repeat the procedure described previously (in point 3) for each
day of the week .
- 30 -
.
again .
1
2
3
4
5
6
7
every day .
1
. The programme set for day 1 (1 = monday, 2 =
1
1
1
1
Cod . 1910000000276 - nv04
2
or
. Save by
2
Publicidad
