Cordivari PLUS Manual De Uso página 34

English
1- From the maximum ambient temperaturre setting, press
appears on the display .
2- Appars . Press or
= Factory settings reset .
= Factory settings not reset .
3- Press for 5 seconds . The device returns to its initial configuration
13 . Installer settings
13.1 Access
To access the Installer settings in 4 steps: From Auto, Comfort, Eco or
Frost protection mode:
Information
1
display
Press for 5
1
seconds
Setting sequence :
Open window detection → PIN code lock → Restoring factory settings
13.2 Open window detection, activation/deactivation of the Auto
mode
The default setting of the automatic mode is enabled .
1- Press or .
= Automatic mode enabled .
to select
2
Press twice
and goes back automatically to the home display of the user settings .
. rEST
The following factory values will be effective:
Parameters
Comfort setting temperature
Boost duration
Keypad lock
Backlighting
Eco mode temperature lowerin glevel
Frost protection temperature
Minimum set of Comfort setting
temperature
Maximum set of Comfort setting
temperature
Maximal Boost duration
Maximum ambient temperature
for the automatic stop of the Boost
Temperature unit
Press to exit the user settings .
Information
3
display
1
Press for 10
seconds
= Automatic mode disabled .
2- To save and move to the next setting, press
settings, press
13.3 PIN code lock
• Overview
Your heating device is protected by a safety code against unauthorised
- 34 -
5 sec.
Factory settings
Operation
19°C
60 min .
Disabled
User settings
L3
-3,5°C
7°C
7°C
30°C
60 min .
39 °C
°C
= Installer
settings
3 times .
Cod . 1910000000276 - nv04
4
Press briefly
. To exit the installer