Publicidad
Idiomas disponibles
Idiomas disponibles
12.4 Setting the frost protection temperature
Your device is preset at 7°C . You can adjust the Frost protection temperature
from 5°C to 15°C by intervals of 0,5°C .
5- Press
or
to obtain the temperature you require .
6- Press
to save and move to the next setting . To exit the user
settings, press
twice .
12.5 Comfort setpoint temperature limit
You can limit the setting temperature range by introducing a maximum and/or
minimum setting, preventing unintentional changes in temperature .
• Low temperature limit
Locking of the setting range using a minimum temperature stop, preventing
the temperature from being set below that temperature .
The minimum setting is preset to 7°C . You can adjust from 7°C to 15°C by
intervals of 1°C .
7- To change the minimum temperature setting, press
save by pressing
.
If you do not want to change it, press
to set the maximum setting . To exit the user settings, press
• High temperature limit
Locking ofthe setting range using a maximum temperature increase,
preventing the temperature from being set above that temperature . The
maximum setting is preset to 30°C . You can adjust from 19°C to 30°C by
intervals of 1°C .
8- To change the maximum temperature setting, press
To save and move to the next setting, press
Cod . 1910000000276 - nv04
or
1
2
: the device changes automatically
twice .
or
.
1
2
. To exit the user settings,
press
twice .
12.6 Setting of the maximum duration of authorised Boost
The maximum duration of Boost is preset at 60 min . You can adjust it
from 30 to 90 min, by intervals of 30 min .
9- The Boost symbol and the heating indicator appear on the display and
the preset duration of 60 min flash .
10- Press
or
11- To save and move to the next setting, press
12.7 Setting of the maximum ambient temperature for the automatic
then
stop of the Boost
When the Boost is enabled, the device has to heat the room until the
temperature limit: the maximum ambient temperature . When it is reached,
the Boost stops automatically . It is preset at 35°C, you can adjust it from
25°C to 39°C by intervals of 1°C .
The Boost symbol and the heating indicator appear on the display and
the maximum temperature flashes .
12- You can set the Boost maximum temperature by pressing
from 25°C to 39°C by intervals of 1°C .
13- To save and automatically move to the next setting, press
exit user settings, press
12.8 Setting the temperature unit
The pre-set temperature unit is degrees Celsius . This setting cannot be
changed on this version .
14- To save and move to the next setting, press
settings, press
12.9 Restoring factory settings
In order to return to the factory settings, proceed in the following order:
- 33 -
to display the desires duration .
twice .
twice .
English
.
or
.To
. To exit the user
Publicidad
