Cordivari PLUS Manual De Uso página 36

English
To exit the installer setting, press
13.4 Restoring factory settings
If the PIN code protection is disabled, the user and installer settings are
reinitialized:
1- From the PIN code setting, press
display
2- Appears . Press or
= Factory settings reset .
= Factory settings not reset
14 . Expert settings
14.1 Access
To access the expert settings in 5 steps . From Auto, Comfort, Eco or
Frost protection mode:
Information
1
displays
Press for 5
1
seconds
Information
displays
twice .
. appears briefly on the
to select .
2
Press twice
4
Press simultaneously for 10
seconds
3- Press the key
configuration and goes back automatically tothe home display of the
installer settings .
The following factory values will be effective:
Settings
Comfort setting temperature
Boost duration
Keypad lock
Backlighting
Eco mode temperature lowering level
Frost protection temperature
Minimum set of Comfort setting
temperature
Maximum set of Comfort setting
temperature
Maximal Boost duration
Maximum ambient temperature
for the automatic stop of the Boost
Automatic open window
detection
PIN code protection
PIN code
To exit the user setting, press
Setting sequence :
Ambient temperature sensor adjustement → Setting the power →
Restoring factory settings .
Information
displays
1
5
= Expert settings
Press briefly
- 36 -
for 5 seconds . The device returns to its initial
5 sec.
Factory settings
Operation
19°C
60 min .
Disabled
User settings
L3
-3,5°C
7°C
7°C
30°C
60 min .
39°C
Installer settings
Enabled
Disabled
0000
twice .
3
Press for 10
seconds
Cod . 1910000000276 - nv04