Publicidad
Idiomas disponibles
Idiomas disponibles
,'
MANUAL TUNING
BAND
SHIFT
*i-------
— —
—
=U
1 Press the TUNER/BAND
button
repeatedly
to
select the desired band.
FM —
AM
rl
1
When the TUNER/BAND
button
is pressed
while the power
is off, the power is turned
on directly.
To select a band with the remote control
Press the BAND button while pressing
the SHIFT button.
2 Press the+
DOWN or FD
UP button to setect
a station.
Each time the button
is pressed,
the frequency
changes.
When a station is received,
"TUNE" is displayed
for 2 seconds.
During
FM stereo
reception;
[il~ll)
is displayed.
To search for a station quickly (Auto Search)
Keep the +
DOWN or >
UP button pressed
until the tuner
starts searching
for a station.
After tuning
in to a station,
the
search stops.
To stop the Auto Search manually,
press the *
DOWN or FF
UP button.
The Auto
Search
may not stop at stations
with very weak
signals,
When
an FM stereo
broadcast
contains
noise
Press the MONO TUNER button while pressing the SHIFT button
on the remote control
so that "MONO"
appears
on the display.
Noise is reduced,
although
reception
is monaural.
To restore stereo reception,
press these buttons
so that MONO
disappears.
To change the
AM
tuning interval
The default
setting
of the AM tuning
interval
is 10 kHz/step.
If
you use this unit in an area where the frequency
allocation
system
is 9 kHz/step,
change
the tuning
interval.
-
Press
the POWER
button
while
pressing
the TUNEWBAND
button.
To reset the interval,
repeat this procedure.
m
When the AM tuning
interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
9
ENGLISH
PRESETTING STATIONS
0-9,+1 o
The unit can store a total of 32 preset stations.
(Each band has a
maximum
of 20 available
preset
stations. ) When
a station
is
stored, a preset number is assigned
to the station.
Use the preset
number
to tune in to a preset station
directly.,
7 Press the TUNEFVBAND
button to select a band,
and press the ++
DOWN or F-
UP button to
select a station.
2 Press the II SET button to store the station.
A station
is assigned
a preset
number,
beginning
from 1 in
consecutive
order for each band.
Frequency
Preset number
3
Repeat
steps 1
and
2.
The next statiorrwill
not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations
for one band
have already
been stored.
PRESET NUMBER TUNING
Use the remote
control
to select the preset number
directly.
7 Press the BAND button while pressing the SHIFT
button to select a band.
2 Press the numbered
buttons to select a preset
number.
.
Example:
To select preset number 20, press the +10, +10 and O buttons.
To select preset number
15, press the +1 O and 5 buttons.
Selecting
a preset'number
on the main unit
Press the TUNER/BAND
button
to select
a band. Then,
press
the ~
PRESET
button
repeatedly.
Each time the button
is pressed,
the next ascending
number
is
selected.
To
clear a preset station
Select the preset number of the station to be cleared. Then, press
the
CLEAR
button,
and press the II
SET button
within
4
seconds.
The preset numbers
of all other stations
in the band with higher
numbers
are also decreased
by one.
Publicidad
