Publicidad
Idiomas disponibles
Idiomas disponibles
BASIC OPERATIONS
= OPEN/CLOSE
EDIT/CHECK
DISC CHANGE
H'
; 3D
RANDOM/
—.
REPEAT
.-
CD
..l-----
cl
-.
c1
,—'
.!
...-
---
9U
DISC DIRECT PLAY
LOADING DISCS
Press the CD button,
then press the 4
OPEN/
CLOSE button to open the disc compartment.
Load
disc(s) with the label side up,
To play
one or two discs,
place the discs on tray 1 and 2.
To play three discs,
press the DISC CHANGE
button to rotate
the trays after placing
two discs.
Place the third disc on tray 3.
Close the disc compartment
by pressing
the = OPEN/CLOSE
button.
Tray 1
CHANGE
Tray number of the
disc to be played
Total playing
time
I
Total number
of tracks
PLAYING DISCS
Load discs.
To play all discs in the disc compartment,
press the
>
button.
Play begins with the disc on tray 1.
*
Elapsed
playing
time
Number
of track
11
ENGLISH
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The selected
disc is played once.
To stop play,
press the
button.
To pause play,
press the II button. To resume play, press again.
To
search
for a particular point during playback,
keep the
+
or -
button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback,
press
the +
or -
button
repeatedly.
To remove discs,
press the A OPEN/CLOSE
button.
To start play when the power is off (Direct Play Function)
Press the CD button.
The power
is turned
on and play of the
loaded
disc(s) begins.
When
the 4 OPEN/CLOSE
button is pressed
the power is also
turned
on.
To check the remaining time
During play, press the EDIT/CHECK
button on the remote control
while pressing
the SHIFT botton. The amount
of time remaining
until all tracks finish playing
is displayed.
To restore the playing
'
time display,
repeat the above again.
Selecting a track with the remote control
1
Press one of the DISC DIRECT
PLAY buttons to select a disc.
2
Press the numbered
buttons
and the +10 button to select a
track.
Example:
-
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
The selected
track starts to play and continues
to the end of
that disc.
Replacing
discs during play
While one disc is playing, the other discs can be replaced
without
interrupting
play.
1
Press the DISC CHANGE
button.
2
Remove
the discs and replace
with other discs.
3
Press
the
A
OPEN/CLOSE
button
to close
the
disc
compartment,
m
When loading
an 8-cm (3-inch)
disc, put it onto the inner circle
of the tray.
Do not place more than one compact
disc on one disc tray.
Do not tilt the unit
with discs
loaded.
Doing
so may cause
malfunctions.
.
Publicidad
