Publicidad
Idiomas disponibles
Idiomas disponibles
5
6
The duration for the timer-activated
period can be set between
5 and 240 minutes
in 5-minute
steps,
If this step is not completed
within
4 seconds,
repeat from
step 1.
Prepare the source.
To
listen to a CD,
load the disc to be played first on tray 1.
To listen to a
tape,
insert the tape into deck 1 or 2.
To listen to the radio,
tune in to a station.
Press the POWER button to turn the unit off after
adjusting the volume and tone.
O
remains
on the display
after the power is turned
off (timer
standby
mode).
When
the timer-on
time
is reached,
the unit turns
on and
begins
play with the selected
source,
The volume
level is automatically
set to 16 when the power is
turned
off with the volume
level set to 17 or more,
To check the specified time and source
Press the TIMER
button while pressing
the SHIFT button.
The
timer-on
time, the selected
source
name
and the duration
for
the timer-activated
period are displayed
for 4 seconds,
To
cancel timer standby mode temporarily
Press
the TIMER
button
while
pressing
the
SHIFT
button
repeatedly
so that 0 or C?)REC disappears
on the display.
To restore the timer standby
mode, press again to display
@ or
@REC.
Using
the unit while the timer is set
You can use the unit normally
after setting the timer.
Before turning off the power, repeat step 5 to prepare the source,
and adjust the volume
and tone.
'Timer playback
and timer
recording
will not begin unless
the
power is turned off.
Connected
equipment
cannot be turned on and off by the built-
in timer of this unit.
Use an external
timer,
TIMER RECORDING
Timer recording
is applicable
for TUNER
and VI DEO/AUX
(with
an external
timer) sources
only.
Press the TIMER button W
while pressing the SHIFT
button so that @REC appears on the display, and press the
I U SET button within 4
seconds.
Repeat
the steps shown
above from step 2 and insert the tape to be recorded
into deck 2
after step 5,
SETTING THE SLEEP TIMER
2
u
The unit can be turned
off automatically
,at a specified
time.
Use the remote control.
1
2
Press the SLEEP button while pressing the SHIFT
button.
Within 4 seconds,
press the ++
or *
button
~
to specify the time until the power is turned off.
Each time the button is pressed,
the time changes
between
5
and 240 minutes
in 5-minute
steps,
Specified
time
To
check the time remaining until the power is turned off
Press the SLEEP
button once while pressing
the SHIFT button.
The remaining
time is displayed
for 4 seconds.
To
cancel the sleep timer
Press the SLEEP
button twice while pressing
the SHIFT button
so that "SLEEP"
on the display
disappears,
ENGLISH
20
Publicidad
