Panasonic WJ-AVE3 Manual De Instrucciones página 6

Notes:
e During scrolling of titles in the smallest character
size using WJ-TTL5, the point where new lines of
character appear will gradually move up from the
bottom of the screen to the middle of the screen.
e@ Connect the cable of the WJ-TTLS5 to the Title
"Input Connector (4) as shown below.
5. Operation ON/OFF Button (OPERATE)
Press this button to turn on the power. The LED
on this button lights. Also the LED's of the Digital
Effect ON/OFF Button (8), the Black Fade Button (30)
and the Colour Superimpose Button (33) light and
their functions are selected automatically when the
Operation ON/OFF Button is pressed.
Digital Effect
It is necessary to press the Digital Effect ON/OFF Button
(8) to perform the functions from item-6 to item-17.
6. A/V Synchro Button (A/V SYNCHRO)
Any combination of 5 of the digital effects (Strobe,
Mosaic, Paint, Negative or Art) can be synchronized to
the pulse with certain levels of accompanying. music
or sound supplied to the Source Audio Input Jack (53),
Auxiliary Audio Input Jacks (56) or Microphone Input
Jack (3), The A/V Synchro functions for 0.5 seconds
after being triggered. The LED on this button lights up
when this button is pressed.
. A/V Synchro Trigger/Strobe Interval Control
(LEVEL, MIN/MAX)
This control has 2 functions. One is the control for
the trigger sensitivity of the A/V Synchro. When this
control is turned to the MAX position, the A/V Synchro
will be triggered by higher level sounds. When this
control is turned to the MIN position, the A/V Synchro
wiil be triggered by low level sounds.
The other function this control has is the Strobe Interval
Control. The strobe interval can be changed by this
control, when the Strobe Button (9) is selected, from
0.1 seconds (at MIN position) to 2.0 seconds (at MAX
position). The strobe interval can not changed when
the A/V Synchro function is ON.
8.
10.
11.
12.
13.
14,
15,
16,
17.
18.
Digital Effect ON/OFF Button (DIGITAL EFFECT)
This is the Digital Effect on/off button. Only when this
button is pressed (LED lights), the digital effects are
functional.
Strobe Button (STROBE)
The video frames can be frozen intermittently, to
achieve. a strobe effect, by. pressing this button (LED
lights). The strobe interval can be adjusted by the A/V
Synchro Trigger/Strobe Interval Contro! (7).
Note:
When the A/V Synchro function is ON, the strobe
interval is fixed to 0.5 seconds,
Mosaic Button (MOSAIC)
By adding small squares in mosaic-like patterns a
design or blurred image can be created. The size of the
mosaic squares can be changed in 4 steps by pressing
this button repeatedly (LED lights during 4 steps).
Paint Button (PAINT)
For a highly artistic effect, inages can be transformed
to resemble an oil painting of the video scene by
pressing this button. The graduation of the paint effect
can be changed in 4 steps by pressing this button
repeatedly (LED lights during 4 steps).
Negative Button (NEGATIVE)
The on-screen image can be transposed to look like
a negative of the image by pressing this button (LED
lights).
Art Button (ART)
Any one of 8 colours can be added by pressing this
button (LED lights) to the brightest portions of the
on-screen picture. The key level is adjustable by the
Art Level Control (14). Press the Back Colour Selection
Button (20) to obtain the desired colour.
Art Level Control (LEVEL)
This control adjusts the key level of the Art function.
Still Button (STILL)
An instant still or frozen image of the video can be
obtained by pressing this button (LED fights).
Squeeze Button (SQUEEZE)
A smaller version (approximately 1/4 the original size)
of the full-size screen can be produced by pressing
this button (LED lights).
Position Selector (POSITION)
This selector is used to change the position of the
squeezed images in any one of 9 positions on the
screen's black background by pressing this button
repeatedly.
Back Colour Level Control (LEVEL)
This control adjusts the level of the colour which is
selected by the Back Colour Selector (20).