Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 4: ATTACH ENGINE AND THE OIL PIPE
1.
Attach the engine (nº82) to the wheel stand using a polyurethane block (nº79) and large flat washer Ø10
(nº80), hex bolt M8x65 (nº81), flat washer Ø8 (nº34), lock washer Ø8 (nº30), nylon lock nut M8 (nº35).
2.
Attach the clear oil pipe (nº60) to the gear pump oil inlet connector, positioning by clamp (nº61).
3.
Attach the high pressure oil pipe (nº18) to the gear pump oil outlet connector, sealing with O ring Ø11.2x2.4
(nº17).
NOTE: Tighten oil pipe connector between torque of 80-90 N-m.
STEP 5: ATTACH THE HANDLES
29/30
18
61
60
1.
Attach the handles to the control valve, using pin Ø5x26 (nº27), cotter
pin Ø2x10 (nº28), inner hex cylindrical head screw M8x16 (nº29) and
lock washer Ø8 (nº30).
27/28
17
82
80
30/34/44/81
79
59
EN
Publicidad
