Publicidad
Idiomas disponibles
Idiomas disponibles
EN
52
INSTALLING THE HOB
Preparation of the work surface
Cut out the work surface according to the dimensions in the drawing. For
installation purposes, keep at least 5 cm of worktop around the hole. Make sure
that the thickness of the worktop is at least 30 mm. Select a heat-resistant and
insulating worktop material. Wood and similar fibre-rich or moisture-binding
material should only be chosen as a work surface if it has been impregnated to
avoid the risk of electric shock and deformation due to heat.
Note: The safety distance between the sides of the hob and the inside of the worktop
should be at least 5 mm.
Measurements in mm
Article
L
10045303
600
10045556
720
10045557
770
10045558
900
In all circumstances, ensure that the unit is adequately ventilated and that the air
inlet and outlet openings are not blocked. Make sure the unit is in good condition
before installing it.
W
H
A
520
56
570
490
520
56
570
490
520
61
570
490
520
61
775
495
B
X
F
min 50
min 3
min 50
min 3
min 50
min 3
min 50
min. 3
Publicidad
