Publicidad
Idiomas disponibles
Idiomas disponibles
EN
58
•
Do not use adapters, reducers or branches in combination with the appliance
as this could lead to overheating and fire hazard.
•
Make sure that the cable does not come into contact with the hot parts of the
appliance. The mains cable must be laid in such a way that its temperature
does not exceed 75 °C at any time.
Note: If you are unsure whether the wiring in your home is suitable for the appliance,
consult your electrician. Any modifications may only be carried out by a qualified
electrician.
The power supply must comply with national standards. The connection method is
shown below:
Electrical Safety Instructions
•
If the power cord is damaged or needs to be replaced, contact the
manufacturer, customer service or a similarly qualified person to avoid a
hazard.
•
If the unit is connected directly to the socket, a multi-pole circuit breaker with
a minimum distance of 3 mm between the contacts must be installed.
•
The national regulations must be observed during installation.
•
The mains cable must not be kinked or bent.
•
The mains cable must be checked regularly for damage by persons qualified
to do so.
•
The yellow/green wire must be connected to the ground wire and terminals of
the device.
•
The manufacturer is not liable for damage caused by missing or improperly
performed grounding.
•
The socket used for the appliance must be easily accessible at all times.
Publicidad
