Maytag 74007065 Guia Del Usuario página 15

OVEN BOTTOM
Protectoven bottomagainstspillovers,espe-
ciallyacidicor sugary spills,as theymay dis-
colortheporcelain enamel. U sethecorrectpan
size to avoidspilloversand boUovers. D o not
place aluminumfoil directly on the oven
bottom.
UPPER AND LOWER OVEN
LIGHTS
(SELECT MODELS)
To assuretheproperreplacement bulb is
used,order bulb from MaytagCustomer
Service.Carl1-800.6888408,ask forpert
number74004458.halogenbulb.
).- Disconnect D ower to range before
replacing light bulb.
)- Allow ovento coolbeforereplacing
lightbulb.
> Makesurebulbcoverand bulbare
coolbefore touching.
TO REPLACE OVENLIGHT BULB:
1. Whenoveniscool,usefingertipsto grasp
edgeof bulb cover.Pullout and remove.
2. Carefully remove old bulb by pulling
straightout of ceramic base.
3. To avoiddamagingordecreasing the life
ofthe newbulb,donottouchthe bulbwith
barehandsor fingers.Holdwitha cloth or
paper towel. Push new bulb prongs
straightinto smallholesofceramicbase.
4. Replace bulbcover b ysnappinginto place.
5. Reconnectpower to the range. Reset
clock.
LOWEROVENLIGHT
(SELECTMODELS)
)- Disconnect power to range before
replacinglight bulb.
_- Use a dry potholderto preventpos-
sible harmto hands when replacing
bulb.
Be surebulbiscool beforetouching
bulb.
Do not touch hot bulbwith a damp
cloth as this may cause the bulb to
break.
BULB COVER
RETAINER
TO REPLACEOVENLIGHTBULB:
1. When oven is cool, hold bulb cover in
place, then slidewire retainer off cover.
NOTE: Bulbcoverwillfall if not heldin
placewhileremoving wireretainer.
2. Removebulbcoverandlight bulb.
3. Replacewitha 40-wattappliance bulb.
4. Replacebulbcoverand securewithwire
retainer.
5. Reconnect p ower to range.Resetclock.
ELECTRICAL
CONNECTION
Appliances whichrequireelec-
trical
power are e quipped I
with a three-prong ,_---._-' I
groundingplug which /_jz_J! _ I
mustbepluggeddirectly Ill L_ "-_ rl
intoa properlygrounded '
three-hole120volt electricaloutlet.
Always disconnectpower to appliancebe-
fore servicing.
The three-pronggrounding plug offers pro-
tectionagainst s hockhazards.DONOTCUT
OR REMOVE THE THIRD GROUNDING
PRONGFROMTHE POWERCORDPLUG
if an ungrounded,two-hole or other type
electrical outlet i s encountered, i t is theper-
sonalresponsibilityof theapplianceowner
to havetheoutletreplaced witha properly
groundedthree-holeelectricaloutlet.