Publicidad
Idiomas disponibles
Idiomas disponibles
5 术语
证书
5.1
版本 1.0 – 07/2023
Page 1 of 79
Rev. 00
Test Report issued under the responsibility of:
NCB TÜV SÜD Product Service GmbH
Ridlerstrasse 65, D-80339 München
Germany
TEST REPORT
IEC 61010-1
Safety requirements for electrical equipment for measurement,
control, and laboratory use
Part 1: General requirements
Report Number. ................................ :
713298142
Date of issue ..................................... :
2023-04-28
Total number of pages ..................... :
79
Name of Testing Laboratory
preparing the Report ........................ : TÜV SÜD Product Service GmbH
Applicant's name .............................. : Merck KGaA
Address.............................................. : Frankfurter Str. 250, DE-64293 Darmstadt, Germany
Test specification:
Standard ............................................ : IEC 61010-1:2010, IEC 61010-1:2010/AMD1:2016
Test procedure .................................. : CB Scheme
Non-standard test method .............. : N/A
TRF template used ........................... : IECEE OD-2020-F1:2020, Ed.1.3
Test Report Form No. ...................... : IEC61010_1P
Test Report Form(s) Originator ...... : VDE Prüf- und Zertifizierungsinstitut GmbH
Master TRF ........................................ : 2021-04-12
Copyright © 2021 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment
and Components (IECEE System). All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the
reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved IECEE Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing NCB. The
authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this
Test Report.
Disclaimer: This document is controlled and has been released electronically.
Only the version on the IECEE Website is the current document version
Technical Report
Technical Report No.: 713298142
Date: 2023-04-28
Client:
LRE Medical GmbH
Georg-Brauchle-Ring 89, DE-80992 München
Germany
Licence holder:
Merck KGaA
Frankfurter Str. 250, DE-64293 Darmstadt
Germany
Factory:
LRE Medical GmbH
Hofer Straße 5, DE-86720 Nördlingen
Germany
Laboratory equipment
Test object:
Product:
Spectroquant Prove 100, Spectroquant Prove 300,
Model:
Spectroquant Prove 600
Test specification:
IEC 61010-1:2010
IEC 61010-1:2010/AMD1:2016
EN 61010-1:2010/A1:2019
UL 61010-1:2012/R:2019-07
CSA C22.2 No. 61010-1:2012/A1:2018-11
Purpose of examination:
Testing and evaluation according to the test specification
Test result:
The test results show that the presented product is in compliance
with the above listed test specifications.
Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the
result of a single examination of the object in question. It does not imply a general statement regarding the quality of products from
regular production. For further details please see testing and certification regulation, chapter A-3.4.
Report No.: 713298142
Project Manager:
Rev.: 00
Ralph Fischer
Page 1 of 4
Date: 2023-04-28
Phone: + 49 89 5008-4322
TÜV SÜD Product Service GmbH
Fax: + 49 89 5008-4130
Niederlassung München
E-Mail: ralph.fischer@tuvsud.com
Ridlerstraße 65
80339 München
Deutschland
1
2
3
4
5
23
Publicidad
