Kenmore 31510 Manual De Uso Y Cuidado página 13

Option 2 – Scan the QR Code to Download
App
Scan the QR code below and tap
"Download" on the following interface.
Register your account and connect the
robot to Wi-Fi as instructed below.
2. Connect Your Robot to Wi-Fi
Confirm your smartphone is connected to
the Wi-Fi network before attempting to
connect the app to the robot.
NOTE: The Kenmore robot supports
2.4GHz Wi-Fi networks and is compatible
with Apple iOS9 and above and Android 5
and above.
1) Launch the Kenmore app on your
smartphone. You will see the screen
shown below.
INSTALLATION INSTRUCTIONS
2) Click on 'Register'.
3) Read the Privacy Policy and select
'Agree'.
4) Enter your email address and click 'Get
Verification Code'.
5) Exit the app and check your email inbox
for a verification code. Enter the code
directly in the app.
6) Set your password and select 'Done'.
7) Select "Add Device" and tap "Kenmore
31510" on the following app interface.
8) Press on the robot to turn on the
robot.
NOTE: The robot will automatically turn on
once connected to charging dock.
9) Press and hold the
robot for 3 seconds. An audible tone
will sound and the Wi-Fi indicator light
will flash green.
10) Select "Next" button at the bottom of
the app page.
11) Select your Wi-Fi network and enter
the corresponding password of the
Wi-Fi network. Select "Confirm" to
continue.
12) When the robot is successfully
connected to the Wi-Fi network, an
audible tone will activate and the Wi-
Fi indicator light on the robot will
illuminate steadily. Select "Done".
- 13 -
button on the