Error Tones - Kenmore 31510 Manual De Uso Y Cuidado

Error Tones

NOTE:
When the robot requires assistance, both docking indicator light and quick start
power button flash red, and you will hear beeps.
Flashing Red Docking Indicator and Power Button
ERROR TONE
2 Beeps
Solid Yellow Docking Indicator Light
ERROR TONE
2 Beeps
For further questions, please call our support team at 1-877-531-7321. To order a
replacement part, call 1-844-202-9924.
TROUBLESHOOTING
CAUSE
Robot wheels have
left the ground.
Dust bin is not
installed or installed
incorrectly.
The side brushes
are jammed.
The wheels are
jammed.
The brushroll is
jammed.
The moveable front
bumper is stuck in
place.
CAUSE
Battery level is low. Charge the robot. Follow instructions on page 11-12.
SOLUTION
Put the robot back to the ground.
Follow installation instructions on page 17.
Pick up the robot and remove any obstructions such
as hair or string.
Pick up the robot and remove any obstructions such
as hair or string.
Pick up the robot and remove any obstructions
such as hair or string. Reinstall the brushroll with
instructions on page 19.
Remove any obstructions such as hair or string.
Turn off the robot by holding down the power
button for 3 seconds. Restart the robot by pressing
the power button twice. If problem persists, call us
at 1-877-531-7321 for further assistance.
SOLUTION
- 23 -