Operating Instructions - Kenmore 31510 Manual De Uso Y Cuidado

CAUTION
Operate robot at room temperature
between 39.2°F (4°C) and 104°F (40°C)
in order to ensure its safety and normal
function. Make sure the dust bin is
installed before use.
General Operating Instructions
1. Power On Robot
Wake up the robot by pressing and holding
button until a beep can be heard. The
Quick Start Power Button will illuminate. To
start the robot vacuum, press the
again.
NOTE:
Robot will automatically power
on when placed on the charging dock.
2. Pause or Stop A Cleaning Session
Press on the robot to pause a cleaning
session. If you want the robot to return to
the charging dock, press
3. Power Off Robot
Pause the robot and then press and hold
button until a beep can be heard.
NOTE:
If the robot stops working for
more than ten minutes, it automatically
enters the sleep mode (all the lights on the
robot will turn off). Press
wake up robot.
NOTE:
The robot will return to the
charging dock automatically when the
battery level becomes low or when the
robot finishes cleaning.
Select A Cleaning Mode (If Desired)
The robot is capable of operating in 4
different cleaning modes to meet all your
cleaning needs. These modes include: Auto,
Spot, Edge and Manual. Select a cleaning
mode in the app.

OPERATING INSTRUCTIONS

button
on the robot.
on the robot to
- 15 -
Clean Mode
Tap on the robot or "Clean"
the App to start cleaning in auto cleaning
mode. The robot will return to the charging
dock once finished.
The robot has the ability to adjust the
suction power level across 3 suction modes:
Eco Mode, Normal Mode, and High Mode.
Within the app, select the strength setting
button to adjust the suction power.
Eco Mode is ideal for hard floors or quiet
operation.
Normal Mode is ideal for various floor
types.
High Mode is ideal for cleaning thicker
carpets and hard-to-sweep messes.
Spot Cleaning Mode
Tap "Spot Cleaning"
cleaning in Spot Cleaning Mode.
Spot cleaning is designed to clean a
specific area with a spiral movement in
a radius of 3ft (1m) and should be used
to clean a concentrated area of dust or
debris.
AUTO
on
on the App to start