Cleaning The Brushroll - Kenmore 31510 Manual De Uso Y Cuidado

Aspiradora robotica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the Brushroll

1. Press the two release tabs to unlock the
brushroll cover.
2. Lift the brushroll to remove.
3. Clean the brushroll with the provided
cleaning tool. Make sure that you
remove any hair wrapped around the
edges of the brushroll.
4. Reinstall the brushroll by inserting the
fixed protruding end first and then
clicking into place.
VACUUM MAINTENANCE AND CARE
5. Align cover into place on the robot and
then press down until you hear a 'click'
indicating the cover is securely installed.
Cleaning and Replacing the Side
Brushes
1. Remove the side brushes by pulling
upwards.
2. Carefully unwind and pull off any hair or
string that is wrapped between the main
unit and the side brushes.
3. Use a cloth dampened with warm water
to remove dust from the brushes.
NOTE:
Only use the side brushes when
completely dry.
4. Re-install the side brushes according to
the left (L) and right (R) markings. Press
the side brushes down until they secure
into place.
- 19 -

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido