Princess 242613 Manual De Instrucciones página 10

3. Coffee filter holder
4. Cover
5. Water reservoir
6. Water level indicator
7. Coffee pot
8. Heating plate
Initial use
•
To clean the inside of the appliance before
first use, only use water for the first few
times. Refer to the section "Hints for use".
Do not use a coffee filter or any ground
coffee. When finished, dispose of the water.
•
Clean the appliance. Refer to the section
"Cleaning and maintenance".
•
Clean the accessories. Refer to the section
"Cleaning and maintenance".
Use
Filling the water reservoir (fig. B)
Warning!
- Before filling the water reservoir, switch off
the appliance and remove the mains plug
from the wall socket.
- Do not fill the water reservoir with more
water than required for making the coffee.
Only use the amount of water required for
making the coffee. The appliance
automatically stops when the water reservoir
is empty.
Caution!
- Do not use the appliance without water in
the water reservoir.
- Do not exceed the maximum mark when
you fill the water reservoir. Make sure that
the water level is always above the
minimum mark during use.
- Only use cold water to fill the water reservoir.
- Do not use carbonated water or other
liquids to fill the water reservoir.
•
Open the cover (4).
•
Fill the water reservoir (5) with water up to
the required mark on the water level indicator
(6).
•
Close the cover (4).
Switching on and off (fig. A)
•
To switch on the appliance, press the on/off
button (1). The on/off indicator (2) comes on.
The appliance starts to make the coffee.
•
To switch off the appliance, press the on/off
button (1) again. The on/off indicator (2)
goes off.
Hints for use (fig. A & B)
Caution!
- Only use ground coffee that is suitable for
the appliance.
- Only use paper coffee filters (1x4) that are
suitable for the appliance.
•
Place the coffee pot (7) on the heating
plate (8).
•
Open the cover (4).
•
Fill the water reservoir (5) with the required
amount of water.
•
Place a suitable coffee filter in the coffee
filter holder (3).
•
Place the coffee filter holder (3) in the
appliance.
•
Put the required amount of coffee in the
coffee filter.
•
Close the cover (4).
•
Insert the mains plug into the wall socket.
•
Take one of the following actions:
- Press the on/off button (1) to switch on
the appliance. The on/off indicator (2)
comes on. The appliance starts to make
the coffee.
- The on/off indicator (2) comes on without
pressing the on/off button (1). The
appliance starts to make the coffee.
Note: The appliance has a pause-and-serve
function which makes it possible to remove
the coffee pot from the heating plate while the
coffee is being made. Remove the coffee pot
from the heating plate to pour a cup of coffee.
Place the coffee pot back on the heating plate
in time to prevent the coffee filter from
overflowing.
•
If the process is completed, the appliance
switches off automatically. The on/off
indicator (2) goes off.
•
Allow the appliance to cool down completely.
•
Remove the mains plug from the wall socket.
10