Fronius MTG 5300s Manual De Instrucciones página 25

Installation and commissioning
Replacing the gas
1
1
nozzle
*
Fitting the steel
NOTE!
liner
When cutting the liner to length, make sure that
► no flash protrudes into the inner liner
► the cutting pliers are placed at a slight angle
► flash is filed down
*
1
1
Screw on the gas nozzle as far as it will go
Shortly before the end a slight resistance may be felt when inserting the steel liner.
The larger the diameter of the liner, the greater the resistance.
2
2
2
2
25