Dreame D9 Manual Del Usuario página 8

How to Use
EN
9. Use the Mopping Function
It is recommended that all loors are vacuumed at least three times beore the
irst mopping session to achieve better cleaning eect.
1)Dampen the mop pad and wring out excess water. Slide the pad all the way
into the slot o the water tank until it is securely in place.
2)Open the water tank lid, ill the tank with water, then securely close the lid.
Note: Do not use non-designated detergents or disinectants.
12
3)Align the mopping module as indicated by the arrow, then slide it into the
back o the robot until it clicks into place. Press the button or use Mi Home/
Xiaomi Home app to start cleaning.
Click
Click
Note:
•
It is not recommended to use the mopping unction on the carpets.
•
Use the app to adjust the water low as required.
4)Press the two side clips inwards and slide the water tank backwards to
separate it rom the robot.
Note: When the robot is charging or not in use, remove the mopping module, pour out all
remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors.
Routine Maintenance
Clean the Dust Bin and Filter
1. Open the robot cover, then press the dust bin clip to remove the dust bin.
2. Open the dust bin cover as indicated by the diagram.
3. Remove the ilter and tap it basket gently.
Note: Do not attempt to clean the lter with a brush or nger.
4. Rinse the dust bin and ilter with water until it is clean. Thoroughly
dry the ilter beore re-installing.
Note:
•
Only clean water should be used to clean the ilter. Do not use detergent.
•
Keep it in a well-ventilated or cool plac.
EN
13