Publicidad
Idiomas disponibles
Idiomas disponibles
15.1
Complete overview
A Seal (Schweißen)
3 functions:
To seal the open end of a bag
without vacuuming air function
When the "Vac & Seal" (Vakuum &
Schweißen) function is in operation, this button stops the motor pump and immediately
starts to seal the bag so that less vacuum pressure inside the bag can be controlled by the
operator to avoid crushing for delicate items.
When the "Seal" (Schweißen) function is in operation, this button stops the heating
immediately.
B Sealing time (Schweißzeit): 2buttons for choosing the best bag seal time
"dry" button (trocken) for dry bags and items without moisture, with a shorter heat sealing
time;
"moist" button (feucht): for wet bags or foods with moisture, with normal heat sealing time.
Default setting is for dry bags and shorter sealing
time.
C Vacuum& Seal/Cancel (Vakuum & Schweißen /
Abbrechen):
This button has two functions depending on the
machine status:
the automatic operation of vacuuming the bag and
then automatically seals the bag when vacuum is
complete;
I Sealing strip:
seal but not to stick to the strip.
At stand-by condition, it starts
Contains a heating wire covered with Teflon which allows the bag to
At working
(vacuuming
or sealing
operations) condition, it stops the machine.
D Cover-lock To lock the cover. On the left
side and right side of the cover there is a key-
press.
E Cover-unlock Press to unlock the cover.
F hook – looks the cover
G sealing profile: presses the bag against
the sealing strip
H + K upper gasket / lower gasket
If you open the cover, you see the
37
Publicidad
