Bosch GSB18V-1330C Instrucciones De Funcionamiento Y Seguridad página 12

4X Bit Tip Holder
Store only bit tips in the on-
tool bit holder. Longer bits
could interfere with proper tool operation and result in
user injury.
The four piece bit tip holder (15) can be used for
convenient on tool storage of your most commonly used
bits.
When mounting bit holder accessory, mount on the side
of the drill opposite the belt clip.
Always make sure you securely tighten the mounting
screw before use. (Fig. 5).
A
HAND
GRIP
FIG. 6
Assembly
E
SLEEVE
B
COLLAR
12
Auxiliary Handle
The tool must be supported with the auxiliary handle
during operation.
To mount the auxiliary handle on the tool loosen the
hand grip (A). Pull on the sleeve (B) and slide the
collar on to the tool as shown (C). Swivel the handle
to desired position (D). Secure the handle in place by
tightening the hand grip (E). See Fig. 6.
To remove the handle for transportation or storage
reverse the steps above.
D
C
FIG. 5
(15)