Bosch GSB18V-1330C Instrucciones De Funcionamiento Y Seguridad página 16

Inserting & Releasing Battery Pack
To insert battery pack: Set Forward/ Reversing lever
to the center (off position). Slide charged battery pack
(12) into the housing until the battery pack locks into
position (Fig. 12).
To check if the battery is locked in place, lightly pull the
battery in the opposite direction. If the battery moves,
do not use the tool and repeat the insertion procedure
until the battery is locked in place and does not slide
backwards.
Your tool is equipped with a secondary locking latch to
prevent the battery pack from completely falling out of
the handle, should it become loose due to vibration.
To remove battery pack: press the battery pack
release button (13) and slide the battery pack towards
the front of the tool. Press the battery pack release
button again and slide the battery pack completely out
of tool housing (Fig. 13).
Depth Gauge
Your drilling depth can be pre-set and/or repeated by
using the depth gauge.
Setting depth: After the auxiliary handle is installed,
make sure the drill bit has been fully inserted into the
chuck before setting the depth gauge.
To adjust depth: turn the wing nut counter-clockwise to
loosen depth gauge, slide depth gauge to desired depth X,
and securely tighten wing nut clockwise (Fig. 14).
Temperature Overload Protection
Avoid using battery operated tools continuously,
for long periods of time, while subjecting the tool to
overload conditions, such as drilling with large diameter
accessories into hard materials. Using battery powered
tools at extreme loads, may cause the battery to exceed
its allowable operating temperature range. When the
battery exceeds normal operating temperature caused
by overload, the speed of the tool may be reduced and
the tool may appear to lose power. To regain the tool's
full performance, the battery must be allowed to cool,
until the operating temperature returns to normal.
Operating Instructions
FIG. 12
FIG. 13
DEPTH
GAUGE
16
(12)
(13)
WING
X
DRILL BIT
FIG. 14
NUT