Bosch GSB18V-1330C Instrucciones De Funcionamiento Y Seguridad página 15

Rapid Mode Selector
The rapid mode selector (6) allows the tool to be set for
various drilling or driving applications. Turn the rapid
mode selector right or left depending on the below
applications (Fig. 10).
FIG. 10
(6)
Drill only action: This mode will lock up the clutch
to permit drilling and driving heavy duty work, and
also will enable bits to be changed quickly and
easily in the keyless chuck.
Driver mode: To drive screws, nuts, and bolts
with use of the adjustable clutch settings to limit
torque and power output to prevent over driving
and fastener/workpiece damage..
Drill with hammer action (GSB18V-1330C
Model only): For drilling in concrete, asphalt,
tile or other similar hard materials. The hammer
drill position overrides the clutch for drilling.
Operating Instructions
Adjustable Clutch
Your tool features 25 clutch settings. Output torque will
increase as the clutch ring (5), is rotated from 1 to 25.
The tool will stop rotating as soon as the set torque is
reached during operation (Fig. 11).
FIG. 11
Brake
When the trigger switch is released it activates the
brake to stop the chuck quickly. This is especially useful
in the repetitive driving and removal of screws.
15
(5)