Bosch GSB18V-1330C Instrucciones De Funcionamiento Y Seguridad página 18

BUILT IN LED WORK LIGHT
Your tool is also equipped with an LED light (23) that
turns on automatically when the switch is activated, for
better visibility when drilling/ driving (Fig. 15). The light
turns off automatically a short time after the trigger is
released. You can adjust this time frame using Bosch
Tool Box app. See "Connectivity" section.
To reduce the risk of injury read the operating instructions included with Bosch GCY42
connectivity module. Operating instructions for GCY42 connectivity module include important
information not covered in this manual.
Bluetooth®
Do not use the power tool with
Bluetooth® in the vicinity of
gas stations, chemical plants, areas where there is
danger of explosion and areas subject to blasting. Do
not use the power tool with Bluetooth® in airplanes.
Do not use the power tool with Bluetooth® in the
vicinity of medical devices. Avoid operation in the
direct vicinity of the human body over longer
periods of time. When using the power tool with
Bluetooth®, interference with other devices and
systems, airplanes and medical devices (e.g., cardiac
pacemakers, hearing aids) may occur.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Robert Bosch Tool Corporation is under
license.
Follow all instructions and
warnings provided by your
Bluetooth® device manufacturer. Failure to follow
recommended procedures could result in personal
injury or property damage.
Exercise extreme caution
w h e n u s i n g B l u e to o t h ®
devices to control or change power tool functions.
Operation of the device may be in a different area than
the paired power tool. Paired devices may have
functionality which allows timed event programming,
including automatically powering on (e.g. flood light).
Depending upon the power tool, these unattended
operations or function changes without direct line of
Operating Instructions
Connectivity
sight to the paired tool could result in personal injury or
property damage.
different than when the tool was last used. The
connectivity module enables transfer of data and
settings based on Bluetooth® wireless technology. With
module installed, select tool settings may be changed
remotely by a paired Bluetooth® device and user
installed app.
interface. Local operating restrictions, e.g. in military
sites or hospitals, are to be observed. Transmitters have
demonstrated an ability to unintentionally interfere with
other devices.
Think Safety
SAFETY IS A COMBINATION OF OPERATOR COMMON
SENSE AND ALERTNESS AT ALL TIMES WHEN THE
TOOL IS BEING USED.
18
Always check tool settings
before use. Settings may be
The connectivity module GCY42
is equipped with a radio