Descargar Imprimir esta página

SOMFY 100 io Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
EN
2.1.3. Tubelite-tube assembly
1) Slide the Tubelite into the roller tube.
2) Lock the drive wheel to prevent movement along the roller tube:
• This can be done either by fastening the roller tube on the drive
wheel using Ø 5 mm self-tapping screws, or Ø 4.8 mm steel pop
rivets positioned 5 mm to 15 mm from the outer rim of the drive
wheel, regardless of the roller tube.
Attention
The screws or pop rivets must only be fastened on the drive wheel, and
not on the Tubelite.
• Alternatively, a drive wheel stop can be used for non-smooth tubes.
2.1.4. Fitting the tube-Tubelite assembly
1) Mount and fasten the tube-Tubelite and drive assembly on the
Tubelite bracket
Attention
Ensure that the tube-Tubelite and drive assembly is locked on the
Tubelite bracket and the drive bracket. This operation prevents the
tube-Tubelite and drive assembly from coming out of the mounting
brackets.
2) Fit the stop rings
2.2. WIRING
Danger
Cut off the mains power supply.
Connect the receiver to one or more white LED lights (A) or (B) and to the mains power supply (C), adhering
to the polarity, as per the table and illustration below.
t
uBelite white reCeiver
ConneCtors
LeD
.1
Light no
͉
The connectors are compatible with TELECO lighting solutions, otherwise use the accessory
ref. 9029053, not supplied (transparent cable: 0 V, white cable: 24 V).
Warning
By default, the unconnected receiver output cable on the TUBELITE WHITE RECEIVER 200 io is protected and
insulated by a cap. Remove this if using a second LED light.
20
5175297A000_LEAF.TUBE WHITE REC 100200 io.indb 20
5175297A000_LEAF.TUBE WHITE REC 100200 io.indb 20
TUBELITE WHITE RECEIVER 100 io - TUBELITE WHITE RECEIVER 200 io
 and the motor head bracket
c
according to the bracket type.
e
C
A
tuBelite white reCeiver
C
B
tuBelite white reCeiver
100
t
io
uBelite white reCeiver
(A)
ConneCtor
LeD
Light no
LeD
Light no
Copyright
:
d
100
io
200
io
200
io
(B)
.1
b
Lue wire
.2
b
rown wire
2023 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
1) 1)
2) 2)
15 mm
15 mm
L
L
1) 1)
c
2) 2)
e
e
OFF
p
(C)
ower supply
(n)
220-240 V AC
(L)
27/10/2023 10:00:45
27/10/2023 10:00:45
5 mm
5 mm
d

Publicidad

loading

Este manual también es adecuado para:

200 io