SOMFY 100 io Manual De Instrucciones página 24

EN
3.4. FAVOURITE (MY) POSITION SETTINGS
3.4.1. Changing the favourite light intensity (my)
1) Press the my button to switch the LED light on in the preset favourite
position.
2) Adjust the light intensity.
3) Once the desired light intensity has been reached, press the my button
until the LED comes on then goes out.
The new favourite light intensity has been programmed.
The LED light comes on again with this intensity .
3.4.2. Deleting the favourite (my) light intensity
1) Press the my button to switch the LED light on in the preset favourite
position.
2) Now press and hold the my button until the LED light comes on then
goes out.
The favourite light intensity has been deleted.
3.5. ADDING/DELETING IO CONTROL POINTS
Refer to the corresponding guide.
3.6. REPLACING A LOST OR BROKEN SOMFY IO CONTROL POINT
To replace a lost or broken io-homecontrol® control point, contact a home automation professional.
3.7. QUESTIONS ABOUT THE RECEIVER?
Observations
The LED light does not react at all
when a button is pressed on the
control point
24
5175297A000_LEAF.TUBE WHITE REC 100200 io.indb 24 5175297A000_LEAF.TUBE WHITE REC 100200 io.indb 24
TUBELITE WHITE RECEIVER 100 io - TUBELITE WHITE RECEIVER 200 io
Possible causes
The control point batteries are
low.
The lighting system is faulty.
Copyright 2023 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
1) 1) 2) 2)
3) 3)
1) 1)
2) 2)
Solutions
Replace the batteries, using
batteries with the same
specifications.
Contact an installer.
27/10/2023 10:00:49 27/10/2023 10:00:49