Publicidad
Idiomas disponibles
Idiomas disponibles
................. Class I Construction
(grounded)
................. Class II Construction
(double insulated)
.../min .......... revolutions per minute ....................... speed
BPM ............. beats per minute
IPM ............... impacts per minute
SPM ............. strokes per minute
sfpm ............. surface feet
.....................
per minute
.....................
DESCRIPTION (FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. On/Off switch
B. Front paper clamp
C. Front clamp button
D. Base plate/pad
E. Paper-limiting ribs
F. Rear paper clamp
INTENDED USE
This sander is designed for professional sanding applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This sander is a professional power tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced
operators use this tool.
or AC/DC ...alternating
........................or direct
current
n o ....................no load
n ......................rated
........................speed
.....................earthing
terminal
.....................safety alert
symbol
G. Side clamp levers
H. Holding tabs
I. Vac-adapter
J. Dust bag
K. Dust bag collar
FIG. 1
A
C
B
E
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Prior to assembly and adjustment, always unplug tool.
Attaching Abrasive Paper (Fig. 2–6)
CAUTION: Turn off and unplug the tool before making any
adjustments or removing or installing attachments or accessories. Be
sure the switch is in the OFF position.
Your sander is designed to use 1/4-sized sanding sheets. Pre-cut
4-1/2" x 5-1/2" sandpaper is available at extra cost.
24
J
K
I
F
H
G
D
Publicidad
