Switching Off; Temperature Regulation; Switching On The Fridge; Switching Off The Fridge - AEG SCZ81800C0 Manual De Instrucciones

6 www.aeg.com
Display
1
Freezer Temperature warmer button
2
Freezer Temperature colder button
3
OK
4
Mode
5
Fridge Temperature warmer button
6
3.2 Display
A B
Off
min
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
The alarm buzzer could
operate after few seconds.
To reset the alarm refer to
"High temperature alarm".
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" .

3.4 Switching off

1. Press the appliance ON/OFF for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default set temperature:
C D E F
COOL FROST
MATIC MATIC
K J I
Fridge Temperature colder button
7
ON/OFF
8
It is possible to change predefined
sound of buttons by pressing together
Mode and temperature colder button for
a few seconds. Change is reversible.
A. Fridge compartment indicator
G
B. Timer indicator
/Temperature indicator
C. ON/OFF indicator
D. COOLMATIC function
E. LongFresh function
F. FROSTMATIC function
H
G. Temperature indicator
H. Freezer compartment indicator
I.
Alarm indicator
J. ChildLock function
K. MinuteMinder function
• +5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.

3.6 Switching on the fridge

To switch on the fridge it is enough to
press the fridge temperature regulator.
To switch on the fridge in the other way:
1. Press Mode until the corresponding
icon appears.
The Fridge OFF indicator flashes.
2. Press OK to confirm.
The fridge OFF indicator goes off.

3.7 Switching off the fridge

1. Press Mode until the corresponding
icon appears.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
To select a different set
temperature refer to
"Temperature regulation".