Operation
Operation
Activating/deactivating the magnetic clamp
48
Activating the magnetic clamp
CAUTION
►
To prevent the magnet from overheating, switch on the
magnetic clamp only when the machine is standing on a
magnetic substrate.
Turn on the switch (22). The indicator lamp in the switch (22)
lights up.
Check the magnetic clamping force at the magnet indica-
tor (23). If the magnetic clamping force is sufficient, the
MAGNET POWER indicator lamp (23) is green. If the MAG-
NET POWER indicator light (23) is red, sufficient magnetic
clamping force is not available.
CAUTION
►
The maximum magnetic clamping force is only available
after switching on the motor.
Deactivating the magnetic clamp
Hold the handle tightly (9) to stop the machine from slipping.
Turn off the switch (22). The indicator lamp in the switch (22)
extinguishes.
MAB 855