cecotec HIDROBOOST 1600 CAR&BIKE Manual De Instrucciones página 6

dañados. Examine el cable alargador antes de utilizarlo
y reemplácelo si estuviera dañado. Tire del enchufe para
desconectarlo, no tire del cable. Mantenga el cable alejado de
fuentes de calor y de bordes afilados. Desconecte el cable de
la toma de corriente antes de desconectar el aparato del cable
alargador. Asegúrese de que está conectado a través de un
carrete de cable que mantenga el cable al menos a 60 mm del
suelo.
SAFETY INSTRUCTIONS
This symbol means: CAUTION, read the instruction
manual before using the appliance.
Before using the appliance, read the following original
instructions carefully. Keep this instruction manual for future
reference or new users.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the device and that the wall
outlet is grounded.
- The mains connection must be carried out by a qualified
electrician and comply with IEC 60364-1. It is recommended
that the power supply to this appliance includes either a
circuit breaker which will break the supply if the leakage
current to the ground exceeds 30 mA for 30 m or a device
which will check the circuit to the ground.
- Always unplug the power supply before disassembling or
repairing the device.
- Make sure that the safety devices are working properly
before using the machine. Do not remove or modify any
parts of the gun or the product itself.
- It is very important to know how to stop the machine and
release the pressure quickly before using it, and to become
H I D R O B O O S T 1600 CAR&BIKE
10
thoroughly familiar with its operation.
- Stay alert to what you are doing during operation.
- Do not operate the machine when tired or under the influence
of alcohol or drugs.
- Do not use the device if its cord or any of its parts are
damaged, e.g. the safety elements, the high-pressure hose
or the trigger of the gun.
- Make sure there are no persons in the area where the device
is to be used.
- Do not tilt your body to reach the product or stand on an
unstable surface. Keep good balance at all times.
- Follow the maintenance instructions specified in this
manual.
- Make sure the product is placed on a stable surface during
operation, transport, assembly or disassembly. Be careful
when moving it from one place to another to avoid damaging
it.
- In the event of an accident, turn off the machine and
disconnect it from the mains immediately.
- Keep the nozzle of the device clear.
- This symbol means: high-pressure jets can be
dangerous if misused. The jet must not be
directed at people, animals, live electrical
equipment or the device itself.
- Do not use the appliance within the reach of persons unless
they are wearing protective clothing.
- Always wear safety goggles and protective clothing when
using or repairing the product. The use of hearing protection
is also recommended.
- Never place your hands or fingers in the water jet while the
product is in operation.
- Do not attempt to block or redirect water leaks with any part
of the body.
H I D R O B O O S T 1600 CAR&BIKE
11