Hygeia FIT Pro Manual Del Usuario página 19

IMPORTANT:
!
household dishwasher. DO NOT use solvents or abrasives. Allow to air dry on a clean surface.
ART-70295-01-AA
6. CLEAN PUMP KIT PARTS BY HAND cleaning steps
a.
infant feeding items. Do not place pump parts directly in
the sink!
b.
c.
guidance. If using a brush, use a clean one that is used
only to clean infant feeding items.
d.
submerging in fresh water in a separate basin.
e.
bottle brush on a clean, unused dish towel or paper towel
in an area protected from dirt and dust. Do not use a dish
towel to rub or pat items dry!
f.
allow them to air-dry after each use. Wash them by hand
or in a dishwasher at least every few days.
7. CLEAN PUMP KIT PARTS IN DISHWASHER cleaning steps
The flanges and milk storage containers can also be washed on upper rack of a standard,
a.
small items into a closed-top basket or mesh laundry bag on
the top rack of the dishwasher. Add soap and, if possible, run
the dishwasher using hot water and a heated drying cycle
(or sanitizing setting).
b.
not completely dry, place items on a clean, unused dish
towel or paper towel to air-dry thoroughly before storing. Do
not use a dish towel to rub or pat items dry!
Place pump parts in a clean wash basin used only for
Add soap and hot water to basin.
Scrub items according to pump kit manufacturer's
Rinse by holding items under running water, or by
Air-dry thoroughly. Place pump parts, wash basin, and
Clean wash basin and bottle brush. Rinse them well and
Clean the pump kit parts in a dishwasher by placing the
Remove from dishwasher with clean hands. If items are
ENGLISH | 19