Hygeia FIT Pro Manual Del Usuario página 25

12.2 Electromagnetic Compatibility
The essential performance of the FIT Pro breast pump is to not exceed 270 mmHg. The pump was tested for immunity to
electromagnetic disturbances and passed according to these criteria.
TABLE 1
Guidance and declaration of manufacturer-electromagnetic emissions.
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such an environment.
Emissions test
RF emissions CISPR
11
RF emissions CISPR
11
Harmonic emissions IEC
61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
WARNING: Do not use this device in adjacent to or stack this device with other equipment. If adjacent or stacked
use is necessary, the device should be observed to verify normal operation condition.
ART-70295-01-AA
Compliance
Group 1, class B
Group 1, class B
Class A
Complies
Electromagnetic environment - guidance
The device uses RF energy only for its internal
function. Therefore, its emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
The device is suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
ENGLISH | 25