Publicidad
Idiomas disponibles
Idiomas disponibles
6
To begin blending,
select
a manual speed or
Blending
program on the
Control
Panel. To pause
blending, press the current
speed or program once,
the unit will stop running
and the timer will pause.
resume blending,
press a
manual speed or the same
program again.
NOTE:
Go to the blending control
panel section on pages 20-23 for
speed and program definitions,
images, and other information.
20
NOTE:
If you need to add
additional ingredients while
blending, switch the setting to
LOW
and remove the lid cap
from the pitcher lid, leaving the
lid attached. Add ingredients
through the hole in the top
of the lid, followed by the
tamper if necessary. Replace
the lid cap, then increase to
DO NOT
your desired speed.
attempt to add items through
the vent hole when blending
HOT
ingredients.
To
CAUTION:
Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and
possible injury.
7
When you have reached your
desired consistency, stop
the appliance by pressing
POWER
. If you are using
a program, you will hear
a beep when the program
has completed. Wait for the
blades to stop turning. The
unit will enter idle-mode.
The timer will reset and the
Blending Control Panel
will
remain illuminated. Press
POWER
again to turn off
the unit completely and the
illuminated display will
turn off.
8
Twist pitcher counterclockwise
and lift off the motor base.
Pour and enjoy!
WARNING:
Blades are sharp. Never
insert your hands into the pitcher.
NOTE:
Press up with your thumb on
the tab near handle first to loosen
pitcher lid for easy removal!
21
Publicidad
