NUTRIBULLET SMART TOUCH BLENDER COMBO NBF520B Guia Del Usuario página 12

nutribullet cup
®
assembly & use.
Review all warning and caution
statements in the Important Safeguards
section (pg 3-9) and on the previous
page before proceeding to Step 1.
1
Place the motor base on
a clean, dry, level surface
such as a counter or table.
2
Add ingredients to
the nutribullet cup.
®
NOTE: Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
WARNING: NEVER BLEND
HOT OR CARBONATED
INGREDIENTS OR LIQUIDS
IN THE SEALED VESSEL, as
doing so may cause excessive
pressure buildup, resulting in
risk of personal injury and or
property damage.
22
3
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
WARNING:
Handle the easy-twist
extractor blade assembly with care, as
the blades are sharp. Never leave the
appliance unattended while in use.
4
Plug the power cord into
an electrical outlet and
POWER
press to turn on
the blender.
5
Turn the cup upside down
and place it onto the motor
base, gently turning the
cup clockwise to lock into
the motor base.
NOTE: The cup must be locked onto
the base for the unit to operate.
6
To begin blending, select a
manual speed or program
on the Blending Control
Panel. To pause blending,
press the current speed
or program once, the unit
will stop running and the
timer will pause. To resume
blending,
press a manual
speed or the same program.
NOTE: Proceed to the blending
control panel chart on page 20 for
speed definitions.
CAUTION
Do not remove the easy-twist
extractor blade from the
nutribullet cup until blending has
®
completely ceased. Do not use
the easy-twist extractor blade
as a storage lid for your cup.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. When storing
contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from
your body when unsealing.
7
When you have reached
your desired consistency,
stop the appliance by
POWER
pressing . The
unit will enter idle-mode.
The timer will reset and the
Blending Control Panel will
remain illuminated. Press
POWER
again to turn off
the unit completely.
NOTE: speeds will automatically
shut off after 60 seconds.
8
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE: Blending should never take
longer than one minute to yield
smooth and creamy results.
23