HOLZMANN MASCHINEN HBS 700 Manual De Instrucciones página 35

13.2 Assembly
13.2.1 Fitting the guide post hand wheel
Attach the guide post hand wheel lever (B) to the guide post
hand wheel, tighten it with the 10mm open wrench.
13.2.2 Fitting the belt tension hand wheel lever
Attach the belt tension hand wheel lever (C) to the belt
tension hand wheel, tighten it with the 10mm open wrench.
13.2.3 Fitting the dust collector plug
Fit the upper dust collector plug (D) to the side of lower
wheel housing. Tighten 4 M5x16 pan head screws (washer
and nuts inside the housing).
13.2.4 Fitting the table
With the help of another person, carefully lift the table (E)
through blade onto the trunnion.
Place 3 M8x30 Allen Screw (F) through the table trunnion,
tighten them to the table.
HOLZMANN MASCHINEN GmbH
The table for this band saw is very heavy. Get help when placing it on the
trunnion.
www.holzmann-maschinen.at
HOLZBANDSÄGE / MWOOD BAND SAW / SIERRA DE CINTA / SCIE À RUBAN
N O T I C E
ASSEMBLY
Seite 35
HBS 700 – HBS 800